LA-12
The Kyosho LA-12 parts bag contains the rear drive belt. It is a standard high torque P3M style belt. The parabolic profile of the dimpled tooth of a P3M belt …
LA-12 Read MoreAuthor: KayjeyLargo
LA-11
The Kyosho LA-11 parts bag contains 2 pulleys and 2 pulley flanges. These pulleys drive the belts, and they lock onto the splines of the front and rear drive hubs. …
LA-11 Read MoreLA-10
The Kyosho LA-10 parts bag contains the belt roller set. Inside, there is The 25mm ‘shaft’ is a hex cap screw with a threaded tip, holding the layshaft cover / …
LA-10 Read MoreLA-9
The Kyosho LA-9 parts bag contains the thrust bearing as used on the Lazer ZX. It sits on the layshaft between the rear drive pulley and the e-clip. LA-9 is …
LA-9 Read More
LA-8
The Kyosho LA-8 parts bag contains the ‘main gear shaft’ or layshaft for the Lazer ZX. It also features the nylon 4×8 ‘collar’ that sits in the LA-6 rear drive …
LA-8 Read MoreThe Lazer ZX center diff
A lot has been said about the Lazer ZX standard center diff. The manual shows the setup, but it doesn’t really explain how it works and is very vague with …
The Lazer ZX center diff Read More
LA-7
The Kyosho LA-7 bag contains the front drive (one-way) hub.
LA-7 Read More
LA-6
The Kyosho Lazer LA-6 bag contains the (one-way) rear drive hub for the Lazer ZX. It sits on the layshaft, with the splines locking into the LA-11 rear drive belt …
LA-6 Read More
LA-5
The Kyosho LA-5 bag contains a guide plate (that is tensioned onto the slipper pad), 2 limiter collars and a limiter nut. These are parts that go on the layshaft …
LA-5 Read More
LA-4
The LA-4 thrust balls are used in the ZX spur gear. They are steel balls, sized 1/8 inch or 3,175mm. It is recommended to keep this size when replacing them, …
LA-4 Read More