LA-6
The Kyosho Lazer LA-6 bag contains the (one-way) rear drive hub for the Lazer ZX. It sits on the layshaft, with the splines locking into the LA-11 rear drive belt …
LA-6 Read MoreParts
LA-5
The Kyosho LA-5 bag contains a guide plate (that is tensioned onto the slipper pad), 2 limiter collars and a limiter nut. These are parts that go on the layshaft …
LA-5 Read More
LA-4
The LA-4 thrust balls are used in the ZX spur gear. They are steel balls, sized 1/8 inch or 3,175mm. It is recommended to keep this size when replacing them, …
LA-4 Read More
LA-3
Kyosho part bag LA-3 contains 2 thrust plates that sit on both sides of the spur gear, tensioned onto the 12 thrust balls residing inside the spur. The dimensions of …
LA-3 Read More
LA-2
The LA-2 spur gear is 0.6 module and 88 teeth, with 8mm center hole. It featured on the original Kyosho Lazer ZX and the Lazer ZX-Sport. Revisions Later versions of …
LA-2 Read More
LA-1
The Kyosho LA-1 bag includes 4 parts The pulley accepts belts 4mm wide with a 3mm pitch (S3M type). The case accepts 8 x 14 bearings to fit the Lazer …
LA-1 Read More