LA-27
The Kyosho LA-27 parts bag contains the front hub carriers (or c-hubs) in which the steering knuckles are mounted. The standard setup features a castor (front suspension angle front to …
LA-27 Read MoreParts
LA-26
The Kyosho LA-26 parts bag contains the suspension arms for the front and rear of the Lazer. There have been revisions to the part, namely Alternatives The LA-104 graphite arms …
LA-26 Read More
LA-25
The Kyosho LA-25 parts bag contains graphite plates for the battery compartment. The large plate is for the 8.4 Volts battery pack while the small straps are used in combination …
LA-25 Read More
LA-24
The Kyosho LA-24 parts bag contains: These rods were featured on the ZX and ZX-Sport. They are not turnbuckles, which means both ends have regular right hand threads and the …
LA-24 Read More
LA-23
The Kyosho LA-23 parts bag contains the servo saver shafts as well as the upper deck post for when using the 8.4 Volts battery pack – in which case the …
LA-23 Read More
LA-22
The Kyosho LA-22 parts bag contains 2 flanged bearings and the 2 screw pins. The bearings can be replaced by flanged ball bearings size 3 x 6 x 2.5mm (ZZ …
LA-22 Read More
LA-21
The Kyosho LA-21 part bag contains the large king pins as used to attach the LA-27 front hub carriers (C-hubs) and the OT-16 knuckle arms (steering knuckles). The king pin …
LA-21 Read More
LA-20
The Kyosho LA-20 parts bag is the suspension shaft set and contains the suspension shafts for the Lazer ZX, ZX-R, ZX-RR and ZX-Sport. It comes with 2 x front pivot …
LA-20 Read More
LA-19
The Kyosho LA-19 parts bag contains the mount plate for the motor. Screwed to the main motor plate, it allows positioning of the motor in relation to the spur depending …
LA-19 Read More
LA-18
The Kyosho LA-18 parts bag contains the main motor plate as used for the ZX, ZX-R and ZX-Sport. To actually attach the motor to this main plate, you will need …
LA-18 Read More