KayjeyLargo – Page 10 – Kyosho Lazer ZX

OT-36

The Kyosho OT-36 parts bag contains 10 m2.6 threaded 5.8mm pivot (or ‘pillow balls’) with a cross head. The single-piece pivot balls are only used on the Lazer ZX-Sport, as …

Parts

OT-31

The Kyosho OT-31 parts bag contains 10 m3 threaded 5.8mm pivot (or ‘pillow balls’) with a cross head. The single-piece pivot balls are only used on the Lazer ZX-Sport, as …

Parts

OT-28

The Kyosho OT-28 parts bag contains the gear set for the differential. It contains: There have been two versions of the OT-28 gear set. The first version had the side …

Parts

OT-19

The Kyosho OT-19 parts bag contains the drive washers or hexes that connect the wheel axles to the wheels. OT-19 uses a tapered hole and friction-fits to the wheels. It …

Parts

OT-18

The Kyosho OT-19 parts bag contains the rear shaft. It’s a cup type wheel axle that take the OT-6 dogbone to connect the wheels to the rear differential. Alternative OT-230 …

Parts

OT-17

The Kyosho OT-17 parts bag contains the front shaft. This is the wheel axle used only on the ZX-Sport model. It’s a cup-style shaft that uses the OT-6 dogbone connecting …

Setup

Bumpsteer on the Lazer ZX

What is bumpsteer? The term bumpsteer refers to the steering angle of a wheel changing when the suspension compresses, mostly due to a bump. More generally, having bumpsteer means that …

Parts / Upgrades

Universal Joints for the Kyosho Lazer ZX range

We will first go over the theory and practise, then speak about the options for the Lazer ZX range. The theory Universal Joints (UJ’s in short, and also called Cardan …

Parts

OT-16

The Kyosho OT-16 parts bag contains the front knuckles (‘knuckle arms’) for the Lazer ZX range. Over the years, they have been changed from metal to plastic. There has also …

Parts

OT-6

The Kyosho OT-6 parts bag contains 2 swing shafts (dog bone style) as used on all the ZX models. Note the ZX-R, ZX-R mk2 and ZX-RR use universal joints at …