LA-32
The Kyosho LA-32 parts bag contains the front axle box. The box consists of two halves: one front and one rear. The box will house the front differential. The Lazer …
LA-32 Read MoreLegendary Vintage RC cars
The Kyosho LA-32 parts bag contains the front axle box. The box consists of two halves: one front and one rear. The box will house the front differential. The Lazer …
LA-32 Read MoreThe Kyosho LA-31 parts bag features the rear bulkhead and upper deck posts Upon a crash, the rear bulkhead can break when the car rolls over and the rear shock …
LA-31 Read MoreThe Kyosho LA-30 parts bag features the suspension brackets or pivots. The rear brackets are marked ‘1’ for the 35mm version (space between the suspension shaft pivot points) and ‘2’ …
LA-30 Read MoreThe Kyosho LA-29 parts bag features the upper rod end set… and some more.
LA-29 Read MoreThe Kyosho LA-28 parts bag contains left and right rear hub carriers. And it includes the rear hub plates as used on the ZX-R mk2 and ZX-RR. These change the …
LA-28 Read MoreThe Kyosho LA-27 parts bag contains the front hub carriers (or c-hubs) in which the steering knuckles are mounted. The standard setup features a castor (front suspension angle front to …
LA-27 Read MoreThe Kyosho LA-26 parts bag contains the suspension arms for the front and rear of the Lazer. There have been revisions to the part, namely Alternatives The LA-104 graphite arms …
LA-26 Read MoreThe Kyosho LA-25 parts bag contains graphite plates for the battery compartment. The large plate is for the 8.4 Volts battery pack while the small straps are used in combination …
LA-25 Read MoreThe Kyosho LA-24 parts bag contains: These rods were featured on the ZX and ZX-Sport. They are not turnbuckles, which means both ends have regular right hand threads and the …
LA-24 Read MoreThe Kyosho LA-23 parts bag contains the servo saver shafts as well as the upper deck post for when using the 8.4 Volts battery pack – in which case the …
LA-23 Read More